McDATA 3000 manual Installing the Gig-E, Installing the Red, Plastic Tab Transceiver

Replacing the Gigabit Ethernet Short Wave Transceiver

3. Pull the transceiver out of the interface card.

		Metal Clasp
Installing the Gig-E	Use the installation procedure below to install all variations of the
Short Wave SFP	Gig-E short wave transceivers.
Transceiver
Installing the Red	1.	Carefully position the long wave transceiver to insert it into the
Plastic Tab Transceiver		interface card.
	2.	Slide the transceiver into the interface card until it clicks into
		place.

Sb055

Hardware Maintenance 12-19

12