McDATA 3000 manual Mapping Node 20 to WWNs Accessed by Node

Configuring Tape Device Extension

9

Mapping Node 20 to WWNs Accessed by Node 10

16.Repeat step a for each LUN that needs the source WWN filtering applied.

17.Click OK.

1.Double-click on the Device Extension interface 20 on Node 20.

2.Click the Peripheral tab and define the WWNs accessed by Node 10 in the WWN field.

3.Enter the LUN of the tape drive (usually LUN zero) in the LUN field. See Table 8-4 (page -7) and the screen below for an example.

Configuring Tape Device Extension 9-37