McDATA 3000 manual Modify Static Routes, Add Static Routes, Delete Static Routes

E

Modify Static Routes

This screen shows a defined default gateway and a host specific static route for Node20. During the configuration process, the default gateway fields are automatically updated when the Ethernet Maintenance interface is configured via the “Initial Config” step. The host specific static route fields are automatically updated when the IP circuit is configured.

Modify Static Routes

To modify the existing entries, highlight the data to be changed and replace it with the new data.

Add Static Routes

If additional entries are required, click once in the Destination field to enable the IP Static Routes information field, then add the new data.

Delete Static Routes

Click on the row selector at the left of the row for the IP Static Route you want to delete. The row becomes highlighted to indicate it has been selected. Then, press the Delete key. Repeat these two steps for each route you want to delete.

E-4 UltraNet™ Edge Storage Router 3000 User Guide