McDATA 3000 manual ATM Circuit Wizard Finish dialog box appears

Configuring a 1x1 ATM Wide Area Network

to the same value as the maximum transmission rate, the maximum transmission rate acts as a static rate limit for the circuit.

18.Select the Enable Compression option to allow compression on the circuit.

The Maximum Transmission Rate and compression features are limited by the license key for the node. The MTR value cannot exceed what is specified by the license key.

19.Click Next to accept the defaults.

The ATM Circuit Wizard - Finish dialog box appears.

This screen indicates that you have successfully created a new ATM circuit between the nodes.

20.Click Finish to add the new circuit to the network configuration. Click Cancel to exit without saving.

The network map should now look like this:

Configuring an E_Port Extension over an ATM WAN 7-23

7