13
User Interface Commands for the UltraNet Edge 3000
| fccnt proxy | This command controls the Switch WWN Proxy. To enable Switch |
|
| WWN Proxy, issue the enable argument followed by the specific Fibre |
|
| Channel instance. To disable Switch WWN Proxy, issue the disable |
|
| argument followed by the specific Fibre Channel instance. |
|
| If Switch WWN Proxy is enabled, the Fibre Channel driver will |
|
| respond to Exchange Link Parameter (ELP) requests with the World |
|
| Wide Name (WWN) of the remote Fibre Channel Switch. If Secure |
|
| Fabric is enabled on either the Brocade or FC/9000 Fibre Channel |
|
| Switches, this option should be enabled. |
| fccnt stats backbone | This command displays the status of the FCCNT backbone. |
|
|
|
| FCSW | The FCSW user interface provides statistical and informational data |
|
| pertaining to the internal Fibre Channel Switch (FCSW) application. |
|
| For further information on the FCSW user interface commands, refer |
|
| to the “FCSW Commands” chapter in the UltraNet Edge Storage Router |
|
| Command Reference. The following sections highlight the commands |
|
| useful for troubleshooting. |
| fcsw cache | This command displays the FCSW buffer cache statistics. |
| fcsw fabric | This command displays all of the Fibre Channel fabric information. |
| fcsw prov | This command displays the provisioning of the FCSW application. |
| fcsw queue | This command displays all of the Fibre Channel queue information. |
| fcsw scr | This command displays all of the Fibre Channel fabric ports that have |
|
| registered for State Change Notification. |
| fcsw stats | This command displays the FCSW statistics. |
| fcsw switch | This command displays the switch’s attributes and each Fibre |
|
| Channel port for which the FCSW module is operating as a F_port. |
| fcsw wan | This command displays the FCSW WAN statistics. |
|
|
|
| FCXL2 | The FCXL2 user interface is used to display information pertaining to |
|
| the configuration, status, and error counters on the FCXL2 Fibre |
|
| Channel card. |
|
| For further information on the FCXL2 user interface commands, refer |
|
| to the FCXL2 chapter in the UltraNet Edge Storage Router Command |
| McDATA UltraNet Edge 3000 User Guide | |
|
|
|
