McDATA manual Fibre Channel, UltraNet Edge 3000’s flash drive as the file fcbb.dll. Using

13

UltraNet Edge 3000 Diagnostic Programs

	***** PASSED--- DMA Incr Byte Test	passed = 1,
	failed = 0
	DMA Incr Packet Test running...
	***** PASSED--- DMA Incr Packet Test	passed = 1,
	failed = 0
	DMA Incr Pkt/Byte Test running...
	***** PASSED--- DMA Incr Pkt/Byte Test	passed = 1,
	failed = 0
	DMA1/2 Test running...
	***** PASSED--- DMA1/2 Test	passed = 1,
	failed = 0
	DMA1/2 Incr Byte Test running...
	***** PASSED--- DMA1/2 Incr Byte Test	passed = 1,
	failed = 0
	DMA1/2 Incr Packet Test running...
	***** PASSED--- DMA1/2 Incr Packet Test	passed = 1,
	failed = 0
	DMA1/2 Incr Pkt/Byte Test running...
	***** PASSED--- DMA1/2 Incr Pkt/Byte Test passed = 1,
	failed = 0
Fibre Channel	The UltraNet Edge 3000 Fibre Channel diagnostic program resides on
Diagnostic Program	the UltraNet Edge 3000’s flash drive as the file fcbb.dll. Using the
(FCBB)	PROM interface, the file must be loaded into memory and executed
	from there.

This program tests the UltraNet Edge 3000’s Fibre Channel module and verifies that it can perform memory transfer functions to the local memory and the global memory. Test data can be looped back either internally or externally.

Individual tests can be selected from the menu or the 99. All Tests option can be used to run tests 3 through 22.

*> SBTM Fibrhannel BB Diagnostic Test Rev. 1.1 - May 04, 2003 <*

MAIN MENU

Options={ SINGLE STOP 0 1 } Total Errors={ 0 } Tests

	Run={ }
	Parameters={ 648 10000 00 0011 1 4 AAL5 Random
	01020304	}
	{ BUFFER_BLD			COMPARE_DATA	BUFFER_CLR	ADD_CRC_TO_OB
	}
	{*FC-BB#0:B#1/D#1:PCI#1: D0010000 D0080000 40221000
	44000000	}
	{ 20	0	Internal Loopback		FPGA Ver 12	FC-BB Board }
	{ BUFFER_MEM			2.13 Gbps RATE }
	{*FC-BB#1:B#2/D#1:PCI#2: D4010000 D4080000 40221000
	44000000	}
	{ 20	0	Intrd }
	McDATA UltraNet Edge 3000 User Guide
13-22