McDATA 3000 manual Building a Custom Edge Chassis, Building the Custom Chassis

4

Building a Custom Edge

3000 Chassis

The UltraNet Edge 3000 supports custom configuration which allows you to select the type of WAN interface, client interface, and the application type for the chassis.

This chapter provides the procedures for building a custom UltraNet

Edge 3000 chassis.

Building the Custom Chassis

	Use the following procedure to configure a customizable UltraNet
	Edge 3000 chassis using the Custom Chassis Wizard.
	The Custom Chassis Wizard is intended for use when configuring a
	1x2 or 2x1 configuration type network. If you are configuring a 1x1 or
	2x2 type solution, the UltraNet Edge 3000 Series Node menu contains
	pre-designed selections for Ethernet and ATM 1x1 and 2x2
	configurations, see Chapters 5, 6, and 7 for configuration examples.
	The Wizard will step you through configuring each node you place
	on the map.
Starting UltraNet	Start the UltraNet ConfigManager (UCM) application from either the
ConfigManager	icon on your desktop or the Start menu.
Using the Custom	The Custom Chassis Wizard will start automatically if the Auto-Start
Chassis Wizard	Custom Chassis Wizard for Edge3000 custom nodes box is checked.
	This option is found on the Tool/Options menu, and is checked by
	default.

Building a Custom Edge 3000 Chassis

4-1