McDATA 3000 manual To the Network Map, the Default Fibre Channel Interface Type

Configuring a 1x1 Ethernet Wide Area Network

2.Click the arrow next to the UltraNet Edge 3000 Series drop-down menu and select the Edge3000 (1x1 - 1 Gbps Ethernet) node type.

	3. Click in the Network Map to create an instance of the UltraNet
	Edge 3000 node.
Adding a Fibre	If this if the first time you are adding an UltraNet Edge 3000 node
Channel Interface	to the Network Map, the Default Fibre Channel Interface Type
	drop-down list will appear. Select the type of Fibre Channel
	interface for the network type you are configuring.

—The first time you see the Default Fibre Channel Interface Type drop-down list, select the interface type you want as the Fibre Channel I/F default. This sets the default that UltraNet ConfigManager will use in each configuration. When configuring FICON extension over an Ethernet WAN, select

FICON.

Configuring FICON Extension 8-5

8