Top Cover Installation Procedure

1.Turn off both power supplies on the UltraNet Edge 3000.

2.Unplug the power cords.

3.Locate the four screws on the top cover of the UltraNet Edge 3000.

4.Remove the four screws from the top cover using the small Phillips screwdriver.

5.To remove the top cover, you must slide the cover towards the rear of the unit as it is locked into the chassis.

6.Follow the Top Cover Installation Procedure to install the cover.

Sb117

Use the following procedure to install the top cover onto the UltraNet

Edge 3000.

Tools required: A small Phillips screwdriver and an adjustable

Torque driver, rated between 3 and 15 in-lbs.

12-8	McDATA UltraNet Edge 3000 User Guide

McDATA 3000 manual Top Cover Installation Procedure