Time Synchronization Protocol, Configure the Time

Time Synchronization Protocol

ConfigManager ensures that Disk Streaming is also enabled on the peer interface(s).

The Enable Disk Streaming check box is displayed only if the Edge node has a chassis software version of 3.1.2 or greater.

Click OK to exit this dialog box and to save changes.

Cancel

Click Cancel to exit this dialog box without saving any changes.

Network

Click Network to select the network routing type.

Help

Click Help to view the Help for this dialog box.

Time Synchronization Protocol

	The UltraNet Edge 3000 TAI (Temps Atomique International) driver
	is responsible for time synchronization using the TAI time format.
	The TAI driver is configured automatically through UCM to support
	the TAI protocol. It can also be manually configured as a Network
	Time Protocol (NTP) client or shut off completely.
	SNTP IPv4 is supported on the UltraNet Edge 3000 via the TAI driver
	and is compatible with the NTP protocol.
	Refer to the UltraNet Edge Storage Router Command Reference
	(620-000253-313) for the TAI commands.

Configure the Time	The Time Synchronization Protocol default in UCM is set to the TAI
Synchronization	Server option. If you would like to configure it as an NTP client or
Protocol	shut it off completely, refer to the following procedures.

D-6