McDATA 3000 manual Active VCI Bits Value Valid Enabled VPI Values

7

Configuring a 1x1 ATM Wide Area Network

8.Configure the PVC parameters for Node10 by entering the appropriate information in the following fields:

NOTE: If POS (Packet over SONET) is enabled, it is not necessary to enter values in the Virtual Path ID (VPI) and Virtual Channel ID (VCI) fields, they are not used for this protocol.

a.Enter the Virtual Path ID (VPI). The value that can be entered in this field is determined by the Active VCI Bits value. Initially the Active VCI Bits Value is set to 11, only 0 and 1 are valid enabled VPI values. The default setting is 0.

Active VCI Bits Value	Valid Enabled VPI Values
12	Zero
11	Zero and 1
10	Zero through 3
4	Zero through 255

b.Enter the Virtual Channel ID (VCI). The value that can be entered in this field is determined by the Active VCI Bits value. Initially the Active VCI Bits value is set to 11, valid

7-14 McDATA UltraNet Edge 3000 User Guide