McDATA 3000 manual Broadcast Data

6

Configuring a 2x2 Ethernet Wide Area Network

1.Right click on Node10 and select Set Initial Config from the menu that appears.

The Initial Network Setup dialog box appears.

The detected UltraNet Edge 3000 will appear in the section labeled RECEIVED UltraNet Configuration Requests.

Broadcast Data

The “broadcast data” only appears the first time you configure, when the Alphanumeric messages window displays BOTP on the front of the UltraNet Edge 3000 (see Figure 2-4 in Chapter 2).

2.Click on the line of text (the Broadcast Data) that appears in that section to cause the serial number and MAC Address fields to appear.

3.Modify the Assign IP Address, the Assign Netmask address, and the Assign Gateway address in the middle of the dialog box to the maintenance interface and default gateway addresses.

6-8 McDATA UltraNet Edge 3000 User Guide