McDATA 3000 manual IP Address of PC running UCM

7

Configuring a 1x1 ATM Wide Area Network

IP Address of PC running UCM

NOTE: The Serial Number is located on the front of the chassis and is used to identify the UltraNet Edge Storage Router.

4.Click Apply to enable the maintenance interface. Once UltraNet ConfigManager has loaded the IP address information into the UltraNet Edge Storage Router it will reset and reboot. Once the unit reboots, you can telnet into it.

NOTE: Watch the UltraNet Edge Configuration Status field for allocated and assigned messages. These messages will only appear for a brief moment and will indicate if the unit is resetting and booting up.

You can also check the Alphanumeric messages window to determine whether the unit is resetting and booting up. When finished booting up, the letters PMA will display and remain in the Alphanumeric messages window until the network configuration is delivered (see Figure 2-4 in Chapter 2). Delivery is performed after the configuration in UltraNet ConfigManager is completed.

7-8 McDATA UltraNet Edge 3000 User Guide