McDATA 3000 manual Indicators, Switches, and Interfaces, Index, Normal

Indicators, Switches, and Interfaces

Indicators, Switches, and Interfaces

Located on the front of the UltraNet Edge 3000 are the four physical I/Os, the Ethernet RJ-45 (maintenance interface), the alphanumeric messages window, and the LEDs (See Figure 2-4). These components are described in Table 2-9.

7

6

5

4

3

2

1

I/O-4

I/O-3

I/O-2

I/O-1

Sb010

8

9

10

11

12

13

14

Figure 2-4

Front View of the UltraNet Edge 3000

Table 2-9

Front Panel Switches, Controls, and Interfaces

Index

Type

Function

Normal

Operation

1

I/O-1

This slot is available for a Fibre Channel card,

or Gigabit Ethernet card (3x1 configurations).

2

I/O-2

This slot is available for a Fibre Channel card.

3

I/O-0

One 10/100 BASE-T Ethernet RJ-45

(Ethernet

maintenance interface used for maintenance,

Maintenance

diagnostics, and network monitoring via a

Interface)

Telnet or FTP session.

4

Serial interface

One RS-232 RJ-45 interface which runs at

connector

38.4 Kbaud, 8N1 used for maintenance and

diagnostic connections.

5

Alphanumeric

Used for displaying the node number. It can

messages

also be used for diagnostic debug.

window

6

I/O-3

This slot is available for a 10/100 Ethernet,

Gigabit Ethernet, OC-3 ATM, or Fibre Channel

card. See Table 2-6 for valid hardware

configurations.

Hardware Configurations

2-13

2