McDATA 3000 manual License Wizard Finish dialog box appears, Links tab IP icon globe

Configuring a 1x1 Ethernet Wide Area Network

The License Wizard - Finish dialog box appears.

5.Click the Finish button to complete the configuration.

6.Right-click on Node 20 and then repeat step through step to set the licensing information for this node.

7.Continue the configuration process by proceeding to the “Adding an IP Circuit” procedure.

Adding an IP Circuit You will now create an IP circuit. A circuit is the IP WAN link between Node10 and Node20. Use the IP Circuit Wizard to create and configure the IP circuit by using the following procedure:

1. Select the Links tab on the center toolbar.

Links tab

IP icon (globe)

2. Click the IP icon on the center toolbar.

Configuring an E_Port Extension over an Ethernet WAN 5-11

5