McDATA 3000 manual Create Data Path Wizard Finish dialog box appears

Configuring a 1x1 Ethernet Wide Area Network

E_port Disk Streaming is disabled by default (the box is not checked). To verify if E_port Disk Streaming has been enabled after the network has been configured, refer to the “E_Port Disk Streaming Settings” section in Appendix D, Advanced UCM Configurations.

Chapter 3, Network Design Criteria, provides network recommendations for E_port Disk Streaming, see the “E_Port Disk Streaming Network Recommendations” section.

7.Choose whether you would like to enable the Switch WWN Proxy between Node10 and Node20. If this option is enabled, the Fibre Channel driver will respond to Exchange Link Parameter (ELP) requests with the World Wide Name (WWN) of the remote Fibre Channel Switch. This option is disabled by default (the box is not checked).

8.Click Next.

The Create Data Path Wizard - Finish dialog box appears.

9.Click Finish to complete the configuration of this data path and

return to the Network Map.

Configuring an E_Port Extension over an Ethernet WAN 5-23

5