Configuring a 2x2 Ethernet Wide Area Network
You will need the following addresses:
• UltraNet Edge 3000 Ethernet Maintenance Interface IP host address
• Default Gateway IP host address for the UltraNet Edge 3000 Ethernet Maintenance Interface
• UltraNet Edge 3000 Ethernet WAN Interface IP host address(es)
• Router IP host address (default gateway for the WAN data path) attached to the UltraNet Edge 3000 Ethernet WAN Interface
|
| When an UltraNet Edge 3000 is configured for F_port, the internal | |
|
| Fibre Channel switch (FCSW) application is used instead of an | |
|
| external Fibre Channel switch. | |
|
|
|
|
|
| NOTE: For more detail on valid configuration options, see the “Valid | |
|
| Hardware Interface Configurations” section in Chapter 2. | |
|
|
|
|
|
|
|
|
Starting UltraNet |
| This section explains how to start the UltraNet ConfigManager | |
ConfigManager |
| software and provides information about the UltraNet ConfigManager | |
|
| Online Tutorial. | |
|
| You will have the option to use the Online Tutorial when you first | |
|
| open the UltraNet ConfigManager software. You can use either the | |
|
| Online Tutorial or this chapter of the UltraNet Edge Storage Router 3000 | |
|
| Series User Guide to create a sample network of a 2x2 F_port Gigabit | |
|
| Ethernet WAN. | |
|
| Start the UltraNet ConfigManager application from either the icon | |
|
| on your desktop or the Start menu. | |
Configuring an F_Port Extension over an Ethernet WAN | |
|
|
6
