McDATA 3000 manual Broadcast Data

Configuring a 1x1 ATM Wide Area Network

Broadcast Data

The “broadcast data” only appears the first time you configure, when the Alphanumeric messages window displays BOTP on the front of the UltraNet Edge Storage Router (see Figure 2-4 in Chapter 2 for a diagram of the Alphanumeric messages window).

The Set Initial config function is unavailable once the Network Maintenance Port IP address has been set. This option can be set only once. However, if you need to change the Maintenance Port IP address after you set the initial configuration, see Maintenance Port IP Configuration.

2.Click on the line of text (the Broadcast Data) that appears in the section labeled RECEIVED UltraNet Edge Configuration Requests to insert the Serial Number and MAC Address fields of this UltraNet Edge Storage Router.

3.Modify the Assign IP Address, the Assign Netmask address, and the Assign Gateway address fields in the middle of the dialog box to the maintenance interface and default gateway addresses.

Configuring an E_Port Extension over an ATM WAN 7-7

7