McDATA 3000 manual Enadmaint

UltraNet Edge 3000 Diagnostic Programs

PowerPC Diagnostic The UltraNet Edge 3000 PowerPC diagnostic program resides on the

Program (SBTT) UltraNet Edge 3000’s flash drive as the file sbtt.dll. Using the PROM interface, the file must be loaded into memory and executed from there.

The PowerPC diagnostic program tests the PowerPC plus the following:

•Support circuitry

•Local memory

•Buffer memory

Individual tests can be selected from the menu or the 99. Execute All option can be used to run tests 5 and 6.

*> SB-TM Diagnostic Test Revision 1.1 12/07/2001 <*

MAIN MENU
Options={SINGLE STOP	0 1}	Total Errors={ 0 } Tests
Run={ }
Parameters={ 00020600	01000000	40000000 44000000 }

{F0040000 QuickMem }

{40000000 41000000 42000000 40800000 41800000

42100000 }

{	1000 0 1 1020304 Incrementing DMA1/DMA2 }
{	ENA_DMA_INT }
0.	Exit Diagnostic	10. DMA Incr Pkt/Byte Test
1.	Set Options	11.	DMA1/2 Test
2.	Set Parameters	12.	DMA1/2 Incr Byte Test
3. LED Register Test		13. DMA1/2 Incr Packet Test
4.	Heartbeat LED Reg Test	14.	DMA1/2 Incr Pkt/Byte
Test
5.	Host Memory Test	15.	NMI Button Test
6.	Buffer Memory Test	16.	Fail LED Test
7.	DMA Test	77.	Debug Utilities
8.	DMA Incr Byte Test	95.	Run DMA Tests
9.	DMA Incr Packet Test	99.	Execute All
-> 99
Host Memory Test running...
***** PASSED--- Host Memory Test			passed = 1,
failed = 0
Buffer Memory Test running...
***** PASSED--- Buffer Memory Test			passed = 1,
failed = 0
DMA Test running...
***** PASSED--- DMA Test			passed = 1,
failed = 0
DMA Incr Byte Test running...
	Troubleshooting and Diagnostics
				13-21

13