McDATA 3000 manual Drop-down arrow

Configuring a 1x1 Ethernet Wide Area Network

drop-down arrow

6.Click the drop-down arrow and select the appropriate IP interface provider and then click Next>.

NOTE: Use I/O port 3 for all 1x1 configurations. When configuring a 2x2, use I/O port 3 to connect the first circuit and I/O port 4 for the second circuit.

The IP Circuit Wizard Node10 Configure Interface dialog box appears.

This dialog box enables you to configure the IP WAN interface properties for Node10.

7. Enter the IP Address (IP WAN address) and the Subnet Mask.

Configuring an E_Port Extension over an Ethernet WAN 5-13

5