McDATA 3000 manual UltraNet ConfigManager Upgrade, Verify the Current, Version of UltraNet

11

UltraNet ConfigManager Upgrade

Thu Sep 13 16:55:36 NOTICE: CNT511:nu_cfgd:1:5:0 ui_envput: Environment variable put (_RPMCPUCheckDisabled) (YES) command received.

User Entry:

cfg envput _RPMCPUCheckDisabled YES Ok.

rpm erase cmntwebview rpm install WV32.RPM rpm query -a CMNTnucleus-V3.1.1.2-0 CMNTdiag-V3.1.1.2-0 CMNTsm-V3.1.1.2-0 CMNTwebview-V3.2-0

cfg envput _RPMCPUCheckDisabled NO

Thu Sep 13 16:56:49 NOTICE: CNT511:nu_cfgd:1:5:0 ui_envput: Environment variable put (_RPMCPUCheckDisabled) (NO) command received.

User Entry:

cfg envput _RPMCPUCheckDisabled NO Ok.

The above data shows a successful installation without any errors.

After installing or upgrading WebView, the webserver needs to be restarted so it can flush all the old WebView information and load the new information from the current WebView program.

4. Issue the ews reinit command at the UltraNet Edge 3000 prompt. example:

tm.0x10> ews reinit

UltraNet ConfigManager Upgrade

		UltraNet ConfigManager is a graphical configuration tool that
		provides a point-and-click process for designing and configuring
		UltraNet Edge 3000 nodes. This tool allows the user to self-configure
		and manage network configuration modifications.
		This section contains the procedure for upgrading the UltraNet
		ConfigManager to the most current version of software.
	Verify the Current	To verify the version of software installed on your PC, click on the
	Version of UltraNet	UltraNet ConfigManager Help menu, then About. The version is
	ConfigManager	displayed in the About UltraNet ConfigManager screen.
	McDATA UltraNet Edge 3000 User Guide
11-14