McDATA 3000 manual ATM Network

Network Design

•A LC to SC fiber cable is needed to connect the UltraNet Edge 3000 to a Brocade 2000 Series Switch.

•A LC to LC fiber cable is needed to connect the UltraNet Edge 3000 to a Brocade 3000 Series Switch.

•The Brocade and McData switches need specific flash parameters specified (see the chapter on “Brocade Switch Requirements” in the UltraNet Edge Storage Router - 3000 Series Release Notes, part number 30200581).

•The FCCNT card auto-senses the attached port speed and adjusts accordingly.

	UltraNet ConfigManager
	When you perform the initial TCP/IP configuration using the
	UltraNet ConfigManager, the PC which has UltraNet ConfigManager
	installed on it, must be on the same LAN and subnet as the Ethernet
	maintenance interface.
ATM Network	Figure 3-2 is an example of an ATM OC-3 network using two
Criteria	UltraNet Edge 3000s in a 1x1 configuration with an ATM WAN.
Default	Personal		Default
	Computer 1
Gateway 1			Gateway 2
192.168.10.3/24		192.168.20.3/24
Maintenance IP		Maintenance IP
	192.168.10.1/24	192.168.20.1/24
FC	ATM OC-3		FC
	Cloud
Fibre	UltraNet	UltraNet	Fibre
	Edge 10	Edge 20	Channel
FC Channel
			FC Switch 2
Switch 1
	192.168.144.16/24	192.168.144.32/24
Fabric			Fabric

Sb045

Figure 3-2Example ATM WAN with two UltraNet Edge 3000s

Network Design Criteria 3-5

3