Adding Nodes for, Area and the Network Map Area

Configuring a 1x1 Ethernet Wide Area Network

Figure 8-2UltraNet ConfigManager Main Window

Adding Nodes for	Use the following procedures to create a network map for a 1x1
an Ethernet WAN	Gigabit Ethernet WAN configuration. This configuration will have
Configuration	two nodes that extend one Fibre Channel interface over one Gigabit
	Ethernet WAN.

	NOTE: If you are configuring a 2x2, the Ethernet Maintenance Interface and
	both WAN interfaces must be on separate subnets.

	1. Select the Nodes tab located on the toolbar between the TreeView
	Area and the Network Map Area.
	The Nodes tab displays three drop-down menus, containing the
	node types for each available UltraNet Edge Series.

8-4	McDATA UltraNet Edge 3000 User Guide