McDATA 3000 manual FC Switch Tab

the Internal McDATA Fibre Channel Switch Interface

	None - Select this option to disable batching.
	Frame Batching - Frame batching increases throughput by grouping
	data frames for transmission.
	The Frame Batching option is not selectable for the FCCNT Fibre
	Channel interfaces or the FC/SCSI Tape Pipelining function, and is
	disabled.
	MTU Batching - This option is the default for E_port and F_port
	configurations. Select this option to enable frame batching based on
	an MTU value. The MTU batching size defines the MTU for the batch
	of backbone frames that are collected and transmitted as one packet
	across the network.
	If this option is selected, the batching size is set to 16000.
	The MTU Batching option is not available for the FC/SCSI Tape
	Pipelining function.
FC Switch Tab	Select this tab to configure the Basic and Advanced Fibre Channel
	Switch interface parameters.
Basic Tab	From this tab, select the Domain ID and view the Destination Node
	information for the Fibre Channel Switch interface.

D-3