McDATA 3000 manual GNIC3 Gigabit, Ethernet WAN, Gnic3 stats

13

User Interface Commands for the UltraNet Edge 3000

		Alias	Ethernet/100 slot 1 PCI I/O 0
		InOctets	0x000000000050ea7b
		InUcastPkts	3371
		InMulticast	0
		InBroadcast	11834
		InDiscards	10124
		InErrors	0
		InUnknownProtos	10124
		OutOctets	0x0000000000068fc7
		OutUcastPkts	10630
		OutMulticast	175
		OutBroadcast	255
		OutDiscards	0
		OutErrors	7
		DiscontinuityTime	366424
		Link is 10Mb half duplex
		TX interrupts = 3633
		Lost carrier = 7
		Broadcast frames sent = 255
		802.3 frames sent = 15
		Ethernet frames sent = 3621
		TX queue length = 1
		Collision errors = 7
		Total frames sent = 3636
		Total bytes sent = 430744
		RX interrupts = 15025
		Unicast frames received = 3372
		Unicast bytes received = 331099
		Broadcast frames received = 11834
		Broadcast bytes received = 4971868
		802.3 frames received = 10124
		Total frames received = 15206
		Total bytes received = 5302967
	GNIC3 Gigabit	The GNIC3 user interface provides statistical and informational data
	Ethernet WAN	pertaining to the Gigabit Ethernet interfaces. For further information
		on the Gigabit Ethernet user interface commands, refer to the
		“Gigabit Commands” chapter of the UltraNet Edge Storage Router
		Command Reference. The following sections highlight the commands
		useful for troubleshooting.
	gnic3 stats	This command displays the statistics regarding the Gigabit Ethernet
		interfaces. The AdminStatus and OperStatus should state Up in
		normal working conditions.
		tm.0x0> gnic3
		gnic31.0x10> stats
		Example of the gnic3 stats command screen display:
	McDATA UltraNet Edge 3000 User Guide
13-6