McDATA 3000 manual Delivering the Configured Network

9

Delivering the Configured Network

16.Repeat step a for each LUN that needs the source WWN filtering applied.

17.Click OK.

18.Proceed to the “Delivering the Configured Network” section.

Delivering the Configured Network

Now that you have configured a sample network, or if you made changes to the configuration parameters, you must deliver the configuration information for each node defined on the active network map to the actual nodes.

The configuration information can be delivered in two different ways, File>Deliver Network or File>Delivery Wizard.

The configurations can be delivered via the Maintenance Port IP or the PPP Port IP. If you do not have direct IP connectivity, use the PPP option. See “Setting the Delivery Properties” below.

9-42 McDATA UltraNet Edge 3000 User Guide