McDATA 3000 manual Installing the Fibre Channel Short Wave SFP Transceiver, Removing the Black

12

Replacing the Fibre Channel Short Wave Transceiver

3. Pull the transceiver out of the interface card.

		Metal Clasp	Sb054
Removing the Black	1.	Remove the fiber optic cabling from the transceiver.
Plastic Tab Transceiver	2.	Gently push the black release tab towards the interface card to
		release the transceiver. To avoid breaking the release tab, be
		careful to push it straight in.
	3.	Pull the transceiver out of the interface card.

Installing the Fibre

Channel Short Wave

SFP Transceiver

Release Tab Sb104

Use the installation procedure below to install both types of short wave transceivers into the interface card.

1.Carefully position the short wave transceiver to insert it into the interface card.

2.Slide the transceiver into the interface card until it clicks into place.

12-30 McDATA UltraNet Edge 3000 User Guide