McDATA 3000 manual Right-click on the FC interface Double-click

Configuring Tape Device Extension

Right-click on the FC interface

Double-click

FC interface

1.In the main window of the UltraNet ConfigManager, right-click on the Fibre Channel Device Extension interface 10 for Node10 in the network map.

The Create Data Path menu is displayed.

2.Click the Create Data Paths selection. You should see “marching ants” outlining the Fibre Channel Device Extension.

3.Double-click on the destination Fibre Channel Device Extension interface 20 on Node 20 in the network map.

The FC Device Extension DataPath Wizard - Introduction dialog box appears.

The FC Device Extension DataPath wizard collects information to create data paths between selected interfaces.

Configuring Tape Device Extension 9-27

9