McDATA 3000 manual Update UltraNet ConfigManager with the Manual Configurations

UltraNet ConfigManager with the Manual Configurations

NOTE: See the appropriate configuration chapter or the UltraNet ConfigManager Tutorial for instructions on configuring your entire network using UltraNet ConfigManager.

17.Once you have configured the entire network, follow the procedure, “Update UltraNet ConfigManager with the Manual Configurations” in this Appendix.

Update UltraNet ConfigManager with the Manual Configurations

It is necessary to update the UltraNet ConfigManager application with the configuration information you entered manually. After using UltraNet ConfigManager to configure the entire network, use the following procedure to update the UltraNet ConfigManager with the manual configurations.

1.Double-click the node you configured with the Command Line Interface in the previous procedure.

2.Double-click the globe icon to bring up the Maintenance IP Port form.

Globe icon

3.Enter the Maintenance Port IP Address and the Subnet Mask for the node you configured manually with the Command Line Interface.

H-3