McDATA 3000 Adding a Fibre Channel Interface

5
Configuring an E_Port Extension over an Ethernet WAN 5-5
Configuring a 1x1 Ethernet Wide Area Network
Adding a Fibre
Channel Interface
If this if the first time you are adding an UltraNet Edge 3000 node to
the Network Map, the Default Fibre Channel Interface Type
drop-down list will appear. Select the type of Fibre Channel interface
for the network type you are configuring.
— The first time you see the Default Fibre Channel Interface
Type drop-down list, select the interface type you want as the
Fibre Channel I/F default. This sets the default that UltraNet
ConfigManager will use in each configuration. When
configuring an E_port extension over an Ethernet WAN, select
Fibre Channel (E_port).
— If you have previously added an UltraNet Edge 3000 node and
need to change the default Fibre Channel interface type, click
the Tool s menu, then Options and select the appropriate
interface type from the drop-down list.
4. Move the cursor to another part of the map and click a second
time to create a second instance of the same type of node. Your
map should look like the following example.