McDATA manual McDATA UltraNet Edge 3000 User Guide

7

Configuring a 1x1 ATM Wide Area Network

1.Select the Nodes tab located on the toolbar between the TreeView Area and the Network Map Area (see Figure 7-2 on page -3).

The Nodes tab displays three drop-down menus, containing the node types for each available UltraNet Edge series.

2.Click the arrow next to the UltraNet Edge 3000 Series drop-down menu and select the Edge 3000 (1x1 - ATM OC-3)node type.

Links tab

Interface tab

Nodes tab

UltraNet Edge 1000 Series

UltraNet Edge 3000 Series

The cursor will turn into crosshairs once you move the cursor over the map area. The cursor must be crosshairs to complete the current operation.

3.Click in the Network Map Area to create an instance of the UltraNet Edge 3000 node.

Adding a Fibre Channel Interface

If this is the first time you are adding an Edge node to the Network Map, the Default Fibre Channel Interface Type drop-down list will appear. Select the type of Fibre Channel interface for the network type you are configuring.

—The first time you see the Default Fibre Channel Interface Type drop-down list, select the interface type you want as the Fibre Channel I/F default. This sets the default that UltraNet ConfigManager will use in each configuration. When configuring an E_port extension over an ATM WAN, select Fibre Channel (E_port).

7-4 McDATA UltraNet Edge 3000 User Guide