McDATA manual 1Sample Fport Ethernet WAN with two UltraNet Edge 3000s

6

Configuring a 2x2 Ethernet Wide Area Network

6.Adding an IP Circuit

7.Creating Data Paths for Fibre Channel Switch Interfaces

8.Delivering the Configured Network

	NOTE: For help on the configuration process, click the Help button on the
	active dialog box or press the F1 key.
Gathering the IP	Before starting the configuration procedure in ConfigManager you
Addresses	will need to gather the IP addresses for your network. The IP host
	addresses and the completed UltraNet Edge Storage Router
	Configuration IP Address Worksheet from Appendix J will be used as
	examples in the configuration process. .
	Figure 6-1 shows an example of a network configured with two
	UltraNet Edge 3000s as a 2x2 implementation.
192.168.101.4		IP Cloud	192.168.201.4
	Router/		Router/
	Switch		Switch
	Default			Default
	Gateway 1			Gateway 2
192.168.10.3			192.168.20.3
Maintenance IP			Maintenance IP
192.168.10.1			192.168.20.1
UltraNet Edge	192.168.100.1		UltraNet Edge	192.168.200.1
Storage Router	Ethernet WAN		Storage Router	Ethernet WAN
Node 10			Node 20
192.168.100.4		IP Cloud	192.168.200.4
	Router/		Router/	6
	Switch		Switch	Sb08

Figure 6-1Sample F_port Ethernet WAN with two UltraNet Edge 3000s

Using the Configuration IP Address Worksheet from Appendix J, gather the IP addresses and associated subnet masks to configure each UltraNet Edge 3000. .

6-2 McDATA UltraNet Edge 3000 User Guide