McDATA 3000 manual 11-12

11

UltraNet WebView Monitoring Application

Obtaining the

UltraNet WebView

Product

Using the WebView Application

The UltraNet WebView product is purchased separately from the other UltraNet products. It can be obtained in a number of different ways:

•If WebView is ordered with the UltraNet Edge 3000, it will be installed on the UltraNet Edge 3000 and the customer will receive a CD-ROM.

•If WebView is purchased after the UltraNet Edge 3000 is purchased, the customer will receive a CD-ROM.

Once the UltraNet WebView application has been purchased and installed, you can access a node in your network by opening your internet browser and entering the IP address of the UltraNet Edge 3000 in the address bar. For further help using the WebView application, see the WebView Online Help.

Browser and System Requirements for WebView

WebView Security

UltraNet WebView Upgrade

UltraNet WebView has been tested on the following operating systems and browsers.

View the ReadMe file for Java plug-in information once you’ve accessed the WebView application.

—Windows 98, 2000, and NT

—Internet Explorer 5.0, 5.5, and 6.0

The WebView product is password protected and shipped with a default user name and password. The default user name is admin and the default password is password. For security purposes, it is suggested that these be changed.

To add, change, or delete user names and passwords, you will need to Telnet into the UltraNet Edge 3000 box and make the changes at the Command Line Interface (CLI). See the UltraNet Edge Storage Router Command Reference manual for the commands to perform any of these functions. These commands can be found in the Nucleus Commands section under the ews submenu.

This section contains the procedure for upgrading the UltraNet WebView application to the most current version of software.

11-12 McDATA UltraNet Edge 3000 User Guide