McDATA 3000 manual Adding an ATM, Circuit, Links tab ATM icon cloud

Configuring a 1x1 ATM Wide Area Network

	5.	Click the Finish button to complete the configuration.
	6.	Right-click on Node 20 and then repeat step through step to set
		the licensing information for this node.
	7.	Continue the configuration process by proceeding to the “Adding
		an ATM Circuit” procedure.
Adding an ATM	You will now create an ATM circuit. A circuit is the ATM WAN link
Circuit	between two nodes. Use the ATM Circuit Wizard to create and
	configure the ATM circuit by following these steps:
	1.	Select the Links tab on the center toolbar.

Links tab

ATM icon (cloud)

2. Click the ATM icon on the center toolbar.

Configuring an E_Port Extension over an ATM WAN 7-11

7