McDATA manual 1Example Ethernet WAN with two UltraNet Edge 3000s

3

Network Design

Default	Personal						Default
	Computer 1
Gateway 1							Gateway 2
192.168.10.3/24 192.168.10.5/24						192.168.20.3/24
Maintenance IP						Maintenance IP
192.168.10.2/24 192.168.10.1/24					192.168.20.1/24 192.168.20.2/24
FC	IP			IP Cloud		IP	FC
Fibre	UltraNet	Router			Router	UltraNet	Fibre
			1		2
	Edge 10					Edge 20	Channel
FC Channel
							FC Switch 2
Switch 1	192.168.100.1/24					192.168.200.1/24
	192.168.100.4/24				192.168.200.4/24
Fabric							Fabric

Sb032

Figure 3-1Example Ethernet WAN with two UltraNet Edge 3000s

When designing your network for an Ethernet WAN using the UltraNet Edge 3000, gather the following information for both the local and remote nodes:

NOTE: Refer to the UltraNet Edge Storage Router Configuration IP Address

Worksheet in Appendix J for help gathering the IP addresses.

•Host IP addresses (Ethernet maintenance interface and Ethernet WAN interface)

•Subnet information

•Default Gateway IP host address on the Ethernet maintenance interface and Ethernet WAN interface

•Static route information:

—IP host address of the natively attached routers or switches

•SNMP information

—System name and contact information

—Community names

—Trap Destinations

3-2 McDATA UltraNet Edge 3000 User Guide