McDATA 3000 manual Click Next

9

Configuring Tape Device Extension

Only the number of entries entered in this screen will be automatically mapped. More will need to be added manually if this number is not high enough (see the “Required Static Edge LUN Mapping” section).

Selecting the Add Automatic Datapath Mapping Entries check box, causes the Edge node 20 to become the target and node 10 the initiator. The Edge target connects to hosts and the Edge initiator connects to tape devices. If both check boxes for node 10 and 20 are selected, both Edge nodes are targets and initiators.

NOTE: The number entered into the Number of New Entries field specifies the maximum number of devices that can be automatically discovered and mapped.

8.Click Next.

The FC Device Extension DataPath Wizard - Network Routing Option dialog box appears.

Dedicated Circuit is the only option available for a 1x1 Tape

Device Extension configuration.

9.Click Next.

Notes:

9-30 McDATA UltraNet Edge 3000 User Guide