Chapter 2: Installation
Chapter 2: Installation
This chapter describes the procedure for installing the Valet Connector.
Installation
To install the Valet Connector:
1.Insert the Valet Connector into an available USB port on your computer.
CISCO
valet
connector
Insert Valet Connector
2.Click Set up your Cisco Valet Connector.
Router Setup
Always do this for software a
AutoPlay
(E:) Cisco Valet Connecter Setup |
|
Install or run program | |
Always do this for software and games: |
|
Install or run program | Set up your Cisco Valet Conn |
Published by Cisco Consumer Products LLC | |
Set up your Cisco Valet Connector |
|
General options | Published by Cisco Consume |
Open folder to view files using Windows Explorer
View more AutoPlay options in Control GeneralPaneloptions
Open folder to view files using Windows Explorer
Speed up my system
Set Up Your Cisco Valet Connector
If you do not see this, access setup on the Valet Connector directly. To do so, perform the following steps for your specific operating system:
Windows 7
a.Go to Start > Computer and
b.
Windows Vista
a.Go to Start > Computer and
b.
Windows XP
a.Go to Start > My Computer and click Cisco Valet Connector Setup.
b.
3.Read the Software End User License Agreement. To accept the agreement and continue, click Next.
License Agreement
4.Please wait while the setup software is setting up your Valet Connector.
Please Wait
5.An Easy Setup Key helps you quickly connect to your wireless hotspot or router. If you do not have an Easy Setup Key, select No, I don’t have an Easy Setup Key. If you have an Easy Setup Key, select Yes, I have an Easy Setup Key. Click Next.
NOTE: Cisco Valet wireless hotspots come with an Easy Setup Key. Cisco Valet wireless hotspots and some Linksys routers also let you create one from your own USB flash drive. (You do not need an Easy Setup Key to complete installation.)
Do you have an Easy Setup Key?
If you do not have an Easy Setup Key, go to step 6. If you have an Easy Setup Key, go to step 8.
2
