Cisco Systems AM10 manual Click Next. Go to step

Chapter 2: Installation

6.A list of available wireless networks appears. Select your network. Click Next.

9. The installation is complete. Click Close.

Connect to a Wireless Network

7.If your network does not use wireless security, go to step 9.

If your network uses wireless security, enter the wireless password for your type of security:

•• Wired Equivalent Privacy (WEP): Enter the WEP key.

•• Wi-Fi Protected Access (WPA/WPA2): Enter the passphrase (also known as a pre‑shared key).

Click Next. Go to step 9.

Enter the Wireless Password

8.Follow the on-screen prompts to use your Easy Setup Key. Click Next.

Insert your Easy Setup Key

You are Now Connected to Your Wireless Network

NOTE: If you have any problems during the installation process, refer to the Frequently Asked Questions in the setup software, or use a computer with an active Internet connection to visit www.ciscovalet.com/support.

3