Chapter 3: Wireless Network Configuration
Chapter 3: Wireless Network
Configuration
To configure the Valet Connector’s wireless connection settings, use a wireless network configuration utility. If you have such a utility on your computer, refer to that utility’s documentation for instructions on use. Otherwise, follow the instructions in the appropriate section below to use your operating system’s
Windows 7
After you have installed the Valet Connector, the Wireless Network Configuration utility icon appears on your computer’s system tray.
Wireless Network Configuration Utility Icon
(If you do not see the icon, click the Show hidden icons arrow 
in the system tray.)
When your mouse pointer hovers over the icon, the status information of your wireless connection appears.
Wireless Connection Status
New Wireless Connection
To connect to a different wireless network:
1.Click the Wireless Network Configuration utility icon. A list of available wireless networks appears.
Available Wireless Networks
2. Select your network, and then click Connect.
Select Network
3.If your network does not use wireless security, go to step 5.
4.Enter the security key, Wired Equivalent Privacy (WEP) key, or
Secured Network
5.This screen appears while the Valet Connector connects to your network. Do not cancel, unless you want to end the connection.
Connecting to Network
NOTE: For help with the Wireless Network Configuration utility, refer to Help and Support.
Click Start 
> Help and Support.
Your computer is now connected to your
wireless network.
4
