Preparing to install the refrigerator.
Read these instructions completely and carefully.
Water Supply to the Icemaker
You will need to connect the icemaker to a cold water line.
A water supply kit (containing copper tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer.
Refrigerator Location
Do not install the refrigerator where the temperature will go below 60°F. (16°C.) because it will not run often enough to maintain proper temperatures.
Install it on a floor strong enough to support it fully loaded.
Clearances
Allow the following clearances for ease of installation, proper air circulation and plumbing and electrical connections:
| 24′ Model | 28′ Model | 30′ Model |
Sides | 1/8″ (3 mm) | 1/8″ (3 mm) | 1/8″ (3 mm) |
Top | 1″ (25 mm) | 1/8″ (3 mm) | 1/8″ (3 mm) |
Back | 1/2″ (13 mm) | 1/2″ (13 mm) | 1/2″ (13 mm) |
If
If the refrigerator is against a wall on either side, allow 3/4″ (19 mm) for door clearance.
Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service
23
