Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Installing and removing previously installed decorator panels.

Read these instructions completely and carefully.

Removing the Handles

In order to remove the decorator panels and replace with new panels you need to remove the handles. A T-20 Torx driver is needed.

1 Loosen and remove the 2 screws in the Top Trim.

2 Loosen and remove the 2 screws in the bracket that attaches the Handle to the top of the Door.

3 Grip the Handle firmly and slide upwards. The keyhole slots on the Handle slide off the buttons on the door.

4 Open the door and slide out the decorator panels.

Top Trim Screws

Bracket Screws

Buttons

Slots

Button

Slot

30

Page 30
Image 30
GE 28, 30 owner manual Removing the Handles