McDATA 3000 manual 12-6

12

Power Supply Removal Procedure

CAUTION

Attach a wrist strap and follow ESD procedures during the handling of all electronic components.

1.Turn off the power to the faulty power supply using the appropriate AC switch.

NOTE: The power supplies are hot swappable, which means an individual power supply can be replaced while the UltraNet Edge 3000 unit is in operation.

2.Unplug the faulty power supply’s power cord.

3.From the front side, depress the metal clip and pull the power tray completely out of its slot.

NOTE: Handle the power supply carefully.

.

Power Tray

Metal Clip

4.Place the faulty power supply into an antistatic bag or on a static mat.

5.Follow the Power Supply Installation Procedure to install a new power supply.

12-6 McDATA UltraNet Edge 3000 User Guide