McDATA 3000 manual Replacing the OC-3 ATM Short Wave Transceiver

Replacing the OC-3 ATM Short Wave Transceiver

Replacing the OC-3 ATM Short Wave Transceiver

12

Removing the OC-3

ATM Short Wave SFP

Transceiver

Removing the Plain

Metal Clasp

Transceiver

This section provides procedures for both removing and installing the OC-3 ATM short wave transceiver.

Tools required: No special tools are required.

CAUTION

Attach a wrist strap and follow ESD procedures during the handling of all electronic components.

The transceivers are hot swappable, which means they can be replaced while the Edge unit is in operation.

CAUTION

Laser radiation is invisible and can damage the eye. Unterminated optical connectors may emit laser radiation. Do not view the beam with the naked eye or with optical instruments. Dust caps and dust covers MUST be left in place on all unterminated bulkhead receptacles and on the end of every radiating fiber jumper.

Use the following procedure to remove the short wave OC-3 ATM transceiver from the (right) port of the interface card. Although the OC-3 ATM interface card currently has two physical ports, only the right port is functional.

1.Remove the fiber optic cabling from the transceiver.

2.Lift the metal clasp up.

Hardware Maintenance 12-25