McDATA 3000 manual Creating a Ficon, Data Path

8

Configuring a 1x1 Ethernet Wide Area Network

20.Click Finish.

Once you have completed the above steps for a basic 1x1 Gigabit Ethernet WAN configuration, your network map should look like the following example:

	21. Continue the configuration process by following the “Creating a
	FICON Data Path” section in this chapter.
Creating a FICON	After configuring the IP circuit, you need to establish a
Data Path	connection between the FICON interfaces by creating a data path.
	This procedure will complete the configuration process.

8-20 McDATA UltraNet Edge 3000 User Guide