McDATA 3000 manual Data Path section in this chapter, Like the following example

7

Configuring a 1x1 ATM Wide Area Network

	21. Continue the configuration process by following the “Creating a
	Data Path” section in this chapter.
Creating a Data	After configuring the ATM circuit, you need to establish a
Path	connection between the FC/IP interfaces by creating a data path.
	This procedure will complete the configuration process.
	Once you have configured the IP circuit, your screen should look
	like the following example:

Right-click on the cloud

Double-click on the cloud

1.In the main window of the map, right-click on the FC/IP interface (the cloud icon for Node10) in the network map.

The Create Data Path menu is displayed.

7-24 McDATA UltraNet Edge 3000 User Guide