McDATA 3000 manual For Node20, enter the IP address labeled

Configuring Tape Device Extension

13.Enter the IP Address (IP WAN address) and the Subnet Mask.

The IP WAN address must be different from the Ethernet maintenance interface address.

NOTE: If you are using the Configuration IP Address Worksheet, enter the following information:

For Node20, enter the IP address labeled .

14.Click Next>.

The IP Circuit Wizard Node20 Configure Gateway dialog box appears.

The gateway IP address entered in this dialog box will be the router IP address attached to the UltraNet Edge Storage Router - 3000 Series (Node20).

At this time you can configure the gateway address (the router IP address attached to the UltraNet Edge 3000) to create a static route to the destination IP address (Node10 in this example) by continuing through the remainder of the steps in this procedure.

Configuring Tape Device Extension 9-23

9