McDATA 3000 manual Right-click on the icon Double click on the icon

Configuring a 1x1 Ethernet Wide Area Network

1.In the main window of the UltraNet ConfigManager, right-click on the FICON interface (the cloud icon for FICON10) in the network map.

Right-click on the icon

Double click on the icon

The Create Data Path menu is displayed.

2.Click the Create Data Paths selection. You should see “marching ants” outlining the FICON interface.

3.Double-click on the destination FICON interface (the cloud icon for FICON20) in the network map.

The Create Data Path Wizard - Introduction dialog box appears.

Configuring FICON Extension 8-21

8