McDATA 3000 Required Source, WWN Filtering, Examples of Static Edge LUN Mapping, Channel extended

Examples of Static Edge LUN Mapping

Network Configuration Examples

Table 8-4 and Table 8-5 are examples of how the devices shown in the example Figure 8-3 (page -4), would be statically mapped in UCM. Use these tables as references when statically mapping the LUNs for your network.

Table 9-4Edge 10 Static LUN Mapping

Device			Mapped
LUN	Device WWN	Device Type	LUN
0		McDATA unit	0
0	A1:A1:A1:A1:A1:A1:A1:A1	Tape A1	1
0	A2:A2:A2:A2:A2:A2:A2:A2	Tape A2	2
0	C4:C4:C4:C4:C4:C4:C4:C4	Tape C4	3
0	FF:02:FF:02:FF:02:FF:02	Media Changer 2	4

9

Note: In both tables, the Device LUN column corresponds with the LUN number on the Peripheral tab in UCM. The Mapped LUN column corresponds with the LUN number on the Host tab in UCM.

Table 9-5Edge 20 Static LUN Mapping
	Device			Mapped
	LUN	Device WWN	Device Type	LUN
0			McDATA unit	0
0		B2:B2:B2:B2:B2:B2:B2:B2	Tape B2	1
	0	FF:01:FF:01:FF:01:FF:01	Media Changer 1	2

Required Source	Depending on the specific network design, source WWN filtering
WWN Filtering	may be required. The network examples in this section require source
	WWN filtering to isolate servers from specific devices that are being
	channel extended.

Examples of Source WWN Filtering

Table 8-6 and Table 8-7 are examples of how the devices shown in the example Figure 8-3 (page -4) should have source WWN filtering applied.

When statically mapping the LUNS in UltraNet ConfigManager, the Source WWN field which is found on the Host tab, is made visible by

Configuring Tape Device Extension 9-7