McDATA manual Setting the Delivery, Node10 Properties UltraNet Edge 3000 screen appears

		Delivering the Configured Network
Setting the Delivery	To set the properties for delivery of the network map configurations,
Properties	use the following procedure:
	1. Right-click the desired node	, then select Properties.
	The Node10 Properties (UltraNet Edge 3000) screen appears.

2.Click on the drop-down menu to select the Delivery Interface.

3.The Delivery Interface defines the IP address by which the network map will be delivered.

4.Select the desired option to deliver the network map (configurations) to the node(s).

5.Click OK.

6.Repeat these steps for the other node(s).

7.Deliver the network map (configurations) by either the Delivery Wizard or the Deliver Network option.

Configuring an E_Port Extension over an Ethernet WAN 5-25

5