McDATA manual McDATA UltraNet Edge 3000 User Guide

8

Configuring a 1x1 Ethernet Wide Area Network

Select FICON Tape Write Pipelining I/Fs

Configure FICON Tape

Write Pipelining

Parameters

•USD-X Nodes with FICON I/Fs - Check this box if you wish to change the PPC adapter parameters for FICON interfaces in USD-X nodes. This check box is disabled if there are no USD-X nodes on the Network Map.

•Edge Nodes with FICON I/Fs - Check this box if you wish to change the node parameters for Edge nodes with FICON interfaces. This check box is disabled if there are no Edge nodes on the Network Map.

•Next - Click Next to proceed to the next dialog.

•Back - Click Back to return to the previous dialog.

•Cancel - Click Cancel to exit the FICON Global Settings Wizard.

•Help - Click Help, or press F1, to view the help information for this dialog.

This dialog displays all FICON interfaces that support Tape Write Pipelining in the network. Additionally, this dialog displays the current Tape Write Pipelining configuration information for the FICON interface. Use this dialog to select interfaces that you want to configure.

•Select All - Click Select All to select all FICON Tape Write Pipelining interfaces.

•Deselect All - Click Deselect All to deselect all checked FICON Tape Write Pipelining interfaces.

•Back - Click Back to return to the previous dialog.

•Next - Click Next to proceed to the next dialog.

•Cancel - Click Cancel to exit the FICON Global Settings Wizard.

•Help - Click Help, or press F1, to see information about this dialog.

Use this dialog to select and enter the Tape Write Pipelining values for the selected FICON interfaces.

•Set - Check the Set box to enter a value for the parameter displayed to the right. The value in the corresponding field is only used if the Set box is checked.

8-26 McDATA UltraNet Edge 3000 User Guide